SEM1500/P Series pt100 Transmitters
The SEM1500/P series are DIN rail mounted transmitters designed to accept Pt100 temperature sensors and to convert them to the industry standard 4 to 20 mA transmission signal.
The small size of the unit (only 12.5 mm wide) enables many more units to be fitted in a smaller space than was previously possible.
The SEM1500/P series are DIN rail mounted transmitters designed to accept Pt100 temperature sensors and to convert them to the industry standard 4 to 20 mA transmission signal.
The small size of the unit (only 12.5 mm wide) enables many more units to be fitted in a smaller space than was previously possible.
SEM1500/TC Isolating Thermocouple Transmitter
The SEM1500/TC is a universal thermocouple input DIN rail mounted transmitter designed to accept most common thermocouple types and to isolate and convert them to the industry standard 4 to 20 mA transmission signal.
The small size of the unit (only 12.5 mm wide) enables many more units tobe fitted in a smaller space than was previously possible. The output signal is galvanically isolated from the thermocouple by 500 VDC to remove the effects of earth loops or earth leakage.
The SEM1500/TC is a universal thermocouple input DIN rail mounted transmitter designed to accept most common thermocouple types and to isolate and convert them to the industry standard 4 to 20 mA transmission signal.
The small size of the unit (only 12.5 mm wide) enables many more units tobe fitted in a smaller space than was previously possible. The output signal is galvanically isolated from the thermocouple by 500 VDC to remove the effects of earth loops or earth leakage.
SEM523 Dual Channel Push Button Transmitter
The SEM523P is a dual channel DIN rail temperature transmitter which accepts any commonly available RTD sensor and converts it to 4 to 20 mA. It utilises the latest push button calibration technique which ensures quick and easy set-up and calibration without the need for soldering links, potentiometers or the use of a PC.
The SEM523P is a dual channel DIN rail temperature transmitter which accepts any commonly available RTD sensor and converts it to 4 to 20 mA. It utilises the latest push button calibration technique which ensures quick and easy set-up and calibration without the need for soldering links, potentiometers or the use of a PC.
SEM215 Smart Universal Temperature Transmitter
The SEM215 universal DIN rail mounted temperature transmitter that accepts most commonly used temperature sensors, slidewire transducers or millivolt signals, isolates and transmits them as a 4 to 20 mA signal.
Galvanically isolated and loop powered.
The SEM215 universal DIN rail mounted temperature transmitter that accepts most commonly used temperature sensors, slidewire transducers or millivolt signals, isolates and transmits them as a 4 to 20 mA signal.
Galvanically isolated and loop powered.
SEM315 HART Temperature Transmitter
The SEM315 is a DIN rail temperature transmitter with full HART communications protocol allowing the user to quickly and easily download information or interrogate the device.
Easy on-site re-calibraition, re-ranging and configuration with a hand held communicator or with a PC and HART modem.
The SEM315 is a DIN rail temperature transmitter with full HART communications protocol allowing the user to quickly and easily download information or interrogate the device.
Easy on-site re-calibraition, re-ranging and configuration with a hand held communicator or with a PC and HART modem.